weberseal acrylic GF
weberseal acrylic GF is a one component water based acrylic joint
sealant and gap filler. It is semi-flexible and mold resistant.
Material type : Acrylic polymer
Specific gravity : 1.7 kg./litre
Skinning time : ~ 10 minutes (+23 ํC / 50% RH)
Curing rate : ~ 2 mm/24h (+23 ํC / 50% RH)
Sag flow : Non sag
Movement capability : ± 10%
Temperature resistance : -20 ํC to +80 ํC
Extrusion rate : 20-80 g./10 sec
Shore a hardness : 40-60 after 28 days (+23 ํC / 50% RH)
E-Modulus : ~ 0.5 N/ mm2 at 100% elongation
Elongation at break : ~ 80% (+23 ํC / 50% RH)
Elastic recovery : > 10% (+23 ํC / 50% RH)
Fungus and algae resistance : Pass
Shrinkage : Approximately 15%
• Odourless, neutral curing
• Non corrosive
• Can be painted over using water based paints
• Can be sanded back once fully cured
• Water clean-up of uncured sealant
• Easy to smoothen and finish
• Do not apply weberseal acrylic GF on bitumen, PE, PP, PTFE,
and silicone
• Protect uncured weberseal acrylic GF from rain or water
approximately 3 hours after application
• Do not use weberseal acrylic GF in areas subject to constant
water immersion
