weber.dry top
Packaging
- 4.5 kg
- 23 kg
2-component flexible waterproofing for any wet areas and swimming pools in high-rise buildings.
Application Areas
interior tiles, lightweight block, Rigid concrete, wood, cement-fiber board, viva board, polyster, smooth concrete wall, interior tile surfaces, Rigid concrete
- After mixing, leave the product: 3-4 minutes before use
- Pot life: 1 hour
- Recommended thickness: at least 2 mm
- To waterproof before tiling in any wet areas subjected to movement
- Resist to water pressure up to 30 meters depth
- Flexible, resist to micro cracking
- Easy to use by rendering trowel
- Resist to hard water and chlorinated water
- Can be used with interior and exterior surfaces
- Non-toxic
- Low VOCs
- Application temperature: 5oC to 45oC
- Not to be used on very cold substrates.
- Avoid applying in direct sunlight or on very hot substrates.
- Do not re-dampen and make sure of no water on the surface before the 2nd coat.
- Clean the tools immediately after use.
- For water tank, it should be flushed with clean water before use.
