Laying granito tiles and size 60x60 tiles for beautiful tiling with cool budget

All Tile Adhesives

From having inspected tiling, the most frequent problems and also obstacles on several sites is tiling with traditional mortar (thick layer feature from mixing of low ratio of sand with mortar that makes mortar flaky and dislodged later.)

Then, I have searched more to get additional information about tile adhesives and found many tile adhesive brands in the market. However, the first brand I have to think about is Weber's tile adhesives under Geckotrademark, weber.tai cem (in blue bag) which is recommended! The distributor suggests that weber.tai cem is standard tile adhesive for laying granite tiles, tiles size up to 60x60 cm. The price is inexpensive and good value when compared with its quality. This is why I would like to confirm that weber.tai cem's quality is worth the price as far as I have checked its main points compared with other brands. Therefore, you can notice that Weber's tile adhesives under Gecko trademark cares about people and their environment as product's quality standard is certified on its bag; low VOCS, Green Industry. This tile adhesive can support tiling for good bonding and beautiful works.

If talking about adhesive application, let me give you a brief as follows:

Mix weber.tai cem in water for a proper proportion (not too thick or too liquid).
Then, spread adhesive onto substrate.
Start to lay tiles by using notched trowel to scrape substrate, and lay tiles in rows together with floor leveling.
Adjust tiles vertically after laying and finally leave them for 24 hours before grouting lastly.
When use good tile adhesive, don't forget to use efficient tile grout. So that you will no longer have any worries about laying tiles and grouting.

Thanks for useful information.

Printable datasheet weber.tai cem - Printable datasheet (PDF - 2,03 MB) Download • Send
Add bookmark
Safety datasheet weber.tai cem - Safety datasheet (PDF - 109,55 KB) Download • Send
Add bookmark

Our technical solutions

Resolve tiles bursting problem with solution or prevention method

When inconstant weather and sudden cold come, not only our body of which we need to take care but also our homes that needs our cares. As different weather changes rapidly is one of the causes of ...

5 Steps to solve debonding problem of wall tiles

Debonded and cracked walls are usual problems. When many people found peel-off paint surface, they tried to remove that and replace it only with new paint. Today, Weber is going to reveal cause of ...

How to prevent tiles and stones from efflorescence

In chemistry, efflorescence (which means "to flower out" in French) is the migration of a salt to the surface of a porous material, where it forms a coating. The essential process involves the ...

How to change traditional tiling application to a new tiling method for durable beauty? Let’s review it!

Recently, I decided to remove the wooden floor installed in the pavilion on the yard lawn and replaced with tiles instead. I cannot bear frequent repairs due to over and over. I am thinking about what...

TILES SELECTION

A tile is a manufactured piece of hard-wearing material .

PREVENT TILING AREAS AND GROUTED JOINTS FROM EFFLORESCENCE

Problems of white stain, salt stain, limewater stain, and rusty stain on tiles and grouted joints are normally found on external areas where being covered with granite, marble, or natural stone.

SUBSTRATE DIAGNOSIS BEFORE TILING

For Efficient Adhesion of Adhesive and Grout

TILING FOR CAR PARK, DEPARTMENT STORE AND INDUSTRY

Car park, department store and industry are considered to be heavy-duty area. Tile adhesive with high flexibility is necessary to be used for fixing tiles on these area.

TILING OF LARGE-SIZE TILES BEING LAID EDGE TO EDGE FOR BEING VISIBLE AS EDGE-JOINT FREEE

TILING OF ABSORBENT TILE such as ceramic tile in living room or bedroom

TILE DIFFERENTIATION ACCORDING TO WATER ABSORBTION

Why are there often be premature debonding problem with granite tile, rustic tile, or any non-absorbent tile?

TILING OF HIGH ABSORBENT TILE (such as clay tile)

Color and texture of clay tile naturally express the earth tone feeling. There are some consideration factors for tiling clay tile

TILING WITH TILE ADHESIVES

Tiling with traditional mortar affects the tiles to be dislodged

Tiling onto green screeds or concrete

TILING ONTO WOOD OR CEMENT-FIBER BOARD

Some limitation of timber substrates and cement-fiber boards such as flexibility and water absorption need to be considered when fixing rigid tiles onto these specific substrates.

See all solutions